Simpson SWF10761 Manual do Utilizador

147194800SWF85661SWF10761

10 useThis option can be used for lightly soiled in order to obtain a good washing result in a short time. The washing time will be reduced according

After having pressed the Start/Pause button, the “Washing” pilot light comes on.The “Door Lock” pilot light indicates if the door can be opened:When t

Depress the “Start/Pause” button to interrupt a program which is running, the corresponding light starts to flash. Depress the button again to restart

Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthe

Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.Oil base

Follow the product manufacturer’s recommendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer.The type and q

16 International wash code symbolsInternational wash code symbolsThese symbols appear on fabric labels, in order to help you choose the best way to t

washing program 17Washing programProgram/TemperatureType of laundryOptionsDescriptionofprogramCottons90° CWhite cotton (heavysoiled cotton items):e.g

* Cottons 60 °C with “Economy”option selected is recommended for a full load of normally soiled cottons, and is the water and energy rating label prog

You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work.The washing powder and additi

2 contents ContentsThe symbols you will see on some paragraphs of this booklet have the following meaning:The warning triangle and/or the key

20 care and cleaningReplace the drawer and run the rinse programme without any clothes in the drum.Drain filter collects lint and other items left in

care and cleaning 21It is therefore a good idea to clean it from time to time.Turn off the water tap. Unscrew the water inlet hose. Clean the filter

22 something not workingSomething not workingMalfunction Possible cause SolutionThe machine does not fill:The machine fills thenempties immediately:C

something not working 23Malfunction Possible cause SolutionThe drain hose is squashedor kinked. (Red Start/Pause pilot light flashes)The drain pump

24 something not workingMalfunction Possible cause SolutionThe machine vibrates or isnoisy:The transit bolts andpacking have not beenremoved.The supp

If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purcha

26 technical data Technical datamc 06htdiWsnoisnemiD85 cm54 cmHeightDepthaPM 50,0muminiMerusserp ylppus retaW0,8 MPaMaximumCottons SyntheticsDelicate

installation 27InstallationUnpackingAll transit bolts and packing must be removed before using the appliance.You are advised to keep all transit devi

28 installationConnect the water inlet hose to a tap with 3/4” BSP thread.This could be done by tying it to the tap with a piece of string or attachi

installation 29Electrical ConnectionThis machine is designed to operate on a 220-240 V, single-phase, 50 Hz supply.Check that your domestic electrica

safety information 3Safety informationIn the interest of your safety and to ensure the correct use, before installing and first using the appliance,

30 environment concerns Environment concernsPackaging materialsThe materials marked with the symbolare recyclable.>PE<=polyethylene>PS<=p

4 safety informationAfter having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing t

Compartment : this compartment is only used for washing powder when a program has Prewash or Stain.Compartment : this compartment is used

6 control panelControl panelProgram selector dialSee page 8.See page 8.See page 9.See page 10.See page 11.See page 10.See page 11.Spin buttonOption b

Ensure that the electrical and water connections comply with the installation instructions.use 7UseFirst UseDaily UseLoad the laundryMeasure out the

8 useSelect the required programAttention!Program Option buttonsTurn the program selector dial to the required program.The green Start/Pause light st

use 9turn the program selector dial to “Off”.Press the Options button repeatedly, to select the desired option. The relevant light will light up.You